Contactez-nous

Votre partenaire en fabrication avancée

Les outils dont vous avez besoin, quand vous en avez besoin

Notre inventaire complet couvre tout : des machines autonomes aux solutions d’automatisation à grande échelle. Quelles que soient les exigences de votre exploitation, nous sommes prêts à fournir des conseils d'experts et des outils de pointe.
Your Partner in Advanced Manufacturing
Blur banner
Ces machines sont en stock dans notre installation de Mississauga et prêtes à être expédiées immédiatement.
DN Solutions
PUMA DNT2600
PUMA DNT2600
DNM 5700
DNM 5700
PUMA DNT2600
LYNX 2600SY
MURATEC
MS60
MS60G
TRAK
trak trl 1845rx front view
TRL 1845RX
trak dpm rx5 three quarter view zoom
DPM RX5
Toolroom machining center
TMC10
JVONNE
jvonne compattatori noleggio breve termine
JEB 200
ROBOJOB
ROBOJOB Turn Assist
ROBOJOB Turn Assist
MITSUBISHI
LoadMatePlus290FNew
MITSUBISHI LOADMATE
Nous ne nous contentons pas de vendre des machines - nous les rendons à vous, et nous le faisons rapidement
Contactez-nous
  • 5620 Timberlea Boulevard

    Mississauga, Ontario L4W 4M6
  • 1885 Moro Drive,
    Windsor, ON, N9A 6J3
  • 370 Chemin Chambly, Suite 225, Longueuil, QC, J4H 3Z6
  • DRG Sales Agency (Ferro Sales Agent) – 58 Weymond Cr, Riverview, NB, E1B 5H6  (506-851-9288)
  • info@ferrotechnique.com
  • +1 905 890 3231
Pages
Machines
DN Solutions
Muratec
Hartford
Jvonne
Trak Machine Tools
Brother
Facebook LinkedIn Icon
Abonnez-vous à nos réseaux sociaux pour rester informé des dernières nouvelles

Copyright 2024 | Ferro Technique | Tous droits réservés

PUMA DNT2600

  • 254mm (10”) Samchully 3-jaw Main Chuck
  • Programmable hydraulic tailstock w/ MT#5 live center
  • Barfeed interface standard
  • Tool Setter
  • Transformer & Hydro Approved
  • Swing over Bed 650 mm (25.6″)
  • Swing over Carriage 460 mm (18.1″)
  • Max Turning Diameter 460 mm (18.1″)
  • Max Turning Length 658 mm (25.9″)
  • Main Spindle 16.0 kW (35 hp)
  • Main Spindle Speed 3500RPM
  • Machine Weight 4,300 kg (9,480 lb)

DNM 5700

  • 12000 RPM Big Plus 40 Taper Spindle
  • Fanuc 0i-Plus Control w/ iHMi touch screen
  • 1GB Data Server
  • 30 Tool Magazine
  • Coolant and Air Through Spindle
  • AICC II (200 block look ahead)
  • Transformer & Hydro Approved
  • X Axis Travel 1,050 mm (41.34″)
  • Y Axis Travel 570 mm (22.44″)
  • Z Axis Travel 510 mm (20.08″)
  • Table Size 51.18“ x 22.44”
  • Table Capacity 1,000 kg (2,204 lbs)
  • Spindle Motor 18.5 kW (25.0 hp)
  • Machine Weight 6,500 kg (14,330 lbs)

LYNX 2600SY

  • Main/Sub/Live 3,500/4,500/5,000RPM
  • 12 Station/24 Index High Speed Servo Turret
  • Full Contouring C-axis on Main and Sub
  • Fanuc 0i-Plus Control with iHMI Interface
  • 254mm (10”) Samchully 3-jaw Main Chuck
  • 210mm (8.26”) Samchully 3-jaw Sub Chuck
  • Programmable Parts Catcher and Part Conveyor
  • Transformer & Hydro Approved
  • Swing over Bed 630 mm (24.8″)
  • Swing over Carriage 460 mm (18.1″)
  • Max Turning Diameter 380 mm (14.96″)
  • Max Turning Length 610 mm (24.0″)
  • Main Spindle 18.5 kW (25 hp)
  • Sub Spindle 84 Nm (62 ft-lbs)
  • Live Spindle 5.5 kW (7 hp)
  • Machine Weight 6,000 kg (13,225 lb)

MS60G

  • Robust 4500 RPM Spindle
  • 8 Station Turret
  • Integral 3 Axis Gantry Loader
  • Large Roller Guides All Axis
  • Fanuc 31i Control
  • Ergonomic Load/Unload
  • Kitagawa B206 3-Jaw Chuck
  • QC & NG Chutes
  • 10 Station Work Feeder Table w/ Pallets
  • Tool Setter
  • Gantry Jaws
  • Fanuc DCS Spec
  • 7.5KW (10.05HP) Spindle Motor
  • Rear Discharge Conveyor
  • Transformer & Hydro Approved
  • X Axis Travel 130mm (5.12″)
  • Z Axis Travel 145mm (5.71″)
  • Gantry Max Weight 3.0kg x2 (6.61lbs x2)
  • Gantry Capacity Size Ø3.15” x 2.36”
  • Max Chuck Size Ø210mm (8.27”)
  • Spindle Bore Ø47mm (1.85″)
  • Spindle Motor 7.5kW (10.06hp)
  • Machine Weight 2,500kg (5,511lbs)

TRL 1845RX

  • 8” Chuck
  • Advanced Features with Verify
  • 1” Tooling Kit
  • Electronic Handwheels
  • TRAKing
  • Coolant Pump
  • Work Lamp
  • Transformer
  • Hydro Approved
  • Swing over Bed 460 mm (18.1″)
  • Swing over Cross Slide 232 mm (9.13″)
  • Height of Centers 228.5 mm (9.00″)
  • Dist Between Centers 1,143 mm (45.0″)

DPM RX5

  • Advanced Features with Verify
  • Power Drawbar CAT40
  • Chip Tray and Splash Shield
  • Electronic Handwheels
  • TRAKing
  • Coolant Pump
  • LED Work Lamp
  • Hydro Approved
  • Transformer
  • X Axis Travel 1,016 mm (40.00″)
  • Y Axis Travel 508 mm (20.00″)
  • Z Axis Travel 655 mm (25.80″)
  • Table Size 50.00“ x 12.00”

TMC10

  • Electronic Handwheels
  • TRAKing
  • Hydro Approved
  • Transformer
  • Set of 16 Retention Knobs
  • X Axis Travel 1,035 mm (40.75″)
  • Y Axis Travel 508 mm (20.00″)
  • Z Axis Travel 508 mm (20.00″)
  • Table Size 44.09“ x 19.69”
  • CAT40 Taper 8000 RPM
  • 16 Tool Carousel
  • Spindle Motor 11.2 kW (15 hp)

JEB 200

  • Stand Alone Chip Compactor
  • With Bridge Breaker Option
  • Produces Ø65mm Bricks
  • Stop/Start Automatically with or without Chips

ROBOJOB Turn Assist

  • Integrated safety wall
  • Area safety scanner
  • Double gripper
  • 4-color stack light
  • Workpieces up to Ø400mm (15.75”)
  • 25kg or 35kg Industrial Robots
  • Built-in controller
  • User-Friendly Interface
  • Intuitive Programming and Setup
  • Switch between jobs quickly and easily
  • Payload 25 / 35 kg (55.1 / 77.16 lbs)
  • Table Size 39.37” x 22.44”

MITSUBISHI LOADMATE

  • Integrated safety wall
  • 6-axes MELFA RV-8CRL Robot
  • R86TB integrated teach pendant
  • Safety module
  • Valve pack option
  • 8kg (17.6lb) Payload
  • Reach 931mm (36.65”)
  • Repeatability +/-.02mm (.0008”)
  • Table Size 36.00” x 36.00”
  • Built-in teach pendant
  • Works with Mills & Lathes